Seven Stellar Benefits of Hydronic Heating Systems
/in Blog/byHydronic heating systems are among the most cost effective because they provide an even, natural, radiant heat throughout your building.
Installing a hydronic heater may cost more upfront than a traditional forced air solution, but the investment pays off immensely in the long run. This reliable solution uses a water heater to distribute radiant heat throughout a home or commercial building. The system works by pumping hot water to radiators, under-floor tubing or heat exchangers.
Here are some of the main reasons you should consider supporting your building with this one-of-a-kind technology:
Better Air Comfort
Hydronic radiant heating equipment is undoubtedly the most comfortable warm air system on the market because it distributes heat evenly for greater comfort throughout the building. Cold drafts are much less likely with this kind of system.
Healthier Indoor Environments
Unlike forced air technology, hydronic heating systems don’t push dust, mold or other allergens around the building. Hydronic systems heat your space with water so they don’t collect or distribute any harmful air contaminants. This promotes a safer air quality for people to breathe.
More Energy Efficiency
Hydronic heating can save you a tremendous amount on your utility bills each month. It’s been proven that water is a much better heat conductor than forced air. Traditional air handlers must push air through insulation and heat gaps, a process that can take hours to perfect. Radiant heating technology exerts a lot less energy as the hydronic boiler quickly heats water and turns it into warm, dispersible air. This can help cut your monthly energy spending by 20-40%.
Quiet Technology
Installing hydronic heating systems can help eliminate headaches and annoyances. You’ll be able to enjoy an environment that is peaceful and productive with no intrusive draft noises or loud banging from your equipment.
Greater Zone Control
One of the most intuitive features of a hydronic system is zone heating. It allows you to control different temperature settings in separate areas of the building. Forced air systems can also be zoned, but with the same level of efficiency as a hydronic heating solution. Take advantage of setting multiple temperature zones around the entire building and save more money in the process.
Balanced Humidity Levels
Hydronic heaters won’t dry out the building, even when the weather is cold. This heat exchanging system not only transfers heat, it also fills the air with moisture.
Easier Installations
Installing a hydronic heating system is easy and the system is versatile. You could rely on a local fuel source such as propane, natural gas, or electricity, but the best option is to use a condensing boiler system. Hydronic boilers quickly evaporate water into a breathable gas, which is evenly distributed throughout the channels of your air handler vents. Additionally, you can also place hydronic piping along the walls of your building, which eliminates the need for ductwork.
Find Your Perfect Hydronic Air Handler Today
Hydronic heating technology offers many benefits, and the experts at John’s Services and Sales are there to help you claim them all. When it comes to radiant heating, we are the gold standard. This includes an extensive collection of solutions such as:
- Hydronic baseboard heaters
- Radiant floor heaters
- Zone valve control systems
- Hydronic heating coils
- Hydronic boiler systems
Our team is here to help you get the most from your indoor environment. We’ll do whatever it takes so you can save more money on energy bills while constantly filling your building with a comfortable and safe air supply.
Contact us today so you can schedule your free consultation with the sharpest mechanical technicians in Illinois!
10 Simple AC Maintenance Tips You Need to Practice
/in Blog, HVAC Best Practices/byIf you want to extend the life of your heating and cooling equipment while cutting energy costs, take matters into your own hands and practice preventive maintenance.
Air Conditioning Treatment Done Right
Maintaining your HVAC equipment doesn’t have to be a drag, and you’d be surprised how much a little TLC can pay off. The best part is you don’t have to spend a lot of money on expensive tune-ups, repairs, or any other outrageous HVAC service. This blog will show you how far a little maintenance can go, with these 10 tips:
1. Keep the Equipment Clean
This is a fairly simple routine to perform regularly. First, rinse off the AC unit. Once it dries, vacuum the fins and brush off any remaining debris. When you do this, make sure to use a soft-bristle brush. For best results, repeat these steps at least once every month.
2. Purchase a Programmable Thermostat
This is a must-have for today’s AC technology. Programmable thermostats can help any homeowner save money on energy bills. Instead of changing the dial to lower the temperature, just install one of these cutting-edge solutions and program your cooling system to rest at different temperatures during certain parts of the day.
3. Switch Out the Air Filters
One of the most overlooked elements of HVAC is air filtration. Fortunately, this is usually a quick fix. When performing annual maintenance on your AC system, you’ll want to shut off the central unit’s power. Let the unit sit idle for about 30 minutes and then clean off any dirt or dust. Finally, replace the old filters with clean ones.
4. Inspect Refrigerant Lines
Perform a thorough inspection on every refrigerant pipe. Make sure each tube is properly covered with the right layer of coolant insulation. If you spot any holes, cracks, or punctures, make a note of the defective area. You’ll need to replace the tube with a new insulation sleeve.
5. Unclog the Condensing System
Your AC system’s condenser can become a magnet for debris, leaves, dirt, and other build-up. You may even find weeds and vines in this part of your unit. Remove any obstruction, wipe down the fan blades, and tighten any loose bolts or screws.
6. Use Whole-House Fans
Whole-house fans collect hot air from higher areas of the home and convert it a cool yet comfortable breeze. It only takes a few minutes to install these fan systems. Just hang them on top of any door or high-hanging window and start turning heat into a pleasant airflow.
7. Put Blinds on the Windows
You might be surprised how easily warm air travels into your building. If you really want to control the heat in your home or office, pay close attention to your windows. Keep them closed and covered with blinds or drapes, especially during the hottest parts of the day.
8. Check Insulation
Insulation wears down easily over time. Inspect any area coated by insulation and remove any rotted or damaged layers. To be safe, it’s best to have a trained professional handle any insulation work.
9. Invest in a Fin Comb
The cage of your AC system bends easily over time. Using a fin comb is an easy way to straighten the fins on the condensing unit. The comb is a specialty tool that works by being run or scraped across the fins and bending them back into shape. Remember to wear gloves when doing this to avoid getting cut.
10. Cover the Condenser
Never wrap your condenser with a tarp. This is a fire hazard, even if your AC system rests idle during the winter. After the summer weather subsides, cover the top of the unit with a weighted piece of plywood.
Build the Perfect Preventive Maintenance Program
When it comes to heating and cooling, the experts at John’s Services and Sales are the best team to work with. We are experts in everything from preventive maintenance to emergency repairs, and everything between. With us by your side, expect better cost savings, more energy efficiency, and better indoor air comfort for years to come.
When you’re ready to set up your preventive maintenance schedule, we’ll be ready to help. Contact us today to schedule your free consultation!
Plumbing and HVAC Services – One Point of Contact
/in Blog, HVAC Issues/byThere are countless benefits to keeping your facility’s crucial infrastructure services under the roof of one provider. From initial construction to ongoing maintenance, having a single point of contact can be invaluable.
3 Ways to Improve Indoor Air Quality
/in Blog, HVAC Best Practices/byIndoor air quality is one of those things you may not think about on a regular basis, but it has an impact on everything we do. Low-quality air can cause health problems and dips in productivity over time, but there are ways to correct that. Your HVAC and Indoor Air Quality Many people are rightly
Can You Trust Your Appliance Repair Technicians?
/in Blog, HVAC Preventative Maintenance/byGenerally, when deciding between appliance repair and replacement, it’s a better choice to salvage your existing appliance. However, be careful when choosing an appliance repair service, as there are a number of pitfalls that might result in you needing to buy a new appliance anyway. Trusting your appliance service technicians should be a given, but
4 Common Refrigeration Installation and Repair Mistakes
/in Blog, HVAC Best Practices, HVAC Issues/byMistakes made during the installation and repair of your commercial refrigeration systems can have drastic consequences. It’s important to work with experts to ensure your system is operating effectively. There are a number of potential pitfalls that can occur when installing or repairing a refrigeration system. From the size of the system to a proper
4 Common AC Questions
/in Blog, HVAC Best Practices, Uncategorized/byDo you have questions about how to keep your AC healthy, when to call the professionals, or best practices for energy savings? The following will be sure to answer some of your most pressing questions, but be sure to reach out to John’s Service and Sales if you have a critical concern! Don’t Ignore Your